SPV Aquatic Weed Control Series

HULL

• All Welded Aluminum Construction
• Non-Trip Chine of Latest Design
• Length 14 to 20 Feet
• Beam 7.5 or 8 Feet
• Transom Relieved 15 Degrees for Rear Wash Safety
• Bottom One Piece .190 5086 Marine Grade Aluminum
• Transom .190 5086 Marine Grade Aluminum, Relieved 15 Degrees for Rear Wash Safety
• Bulkhead & Bow Cap & Sides .125 5052 Marine Grade Aluminum
• 2” X 2” X .250 Aluminum T-Bar Stringers
• Front Deck Area 36” Width with Lockable Storage
• Top of Deck non-skidded for Safety-Choice of Standard Colors
• 2 – 1” Drain Plugs
• Heavy Duty Stainless Bow Eye
• 8” Side Walk Boards

POLYMER

• 3/8” UHMW Polymer Bottom
• Attached with Stainless Steel Flush Mount Bolts

SEATING

• Seating for 3, 2-Single Rear Operator, Single Front Swivel Spray Operator Seat
• Wire Baskets Storage Under Seats
• Custom Marine Vinyl Seat Cushions & Rain Covers

RIGGING

• .065 wall 304 Stainless Steel Tubing Super Structure with 1 ¼” Engine Stand Supports
• .065 wall 1” 304 Stainless Steel Tubing Seat Package
• Round .065 wall 7/8” & 1” 304 Stainless Steel Tubing Cage
• Propeller Guard to provide 3” Min. Clearance for Propeller
• .135” X 2” X 4” Stainless Steel Cage Wire
• Cage access Doors for Engine Maintenance

EQUIPMENT

• Stainless Steel Headers
• Stainless Steel Flex Pipe 3”
• Stainless Steel Mufflers
• AFCO Heavy Duty Engine Cooling Aluminum Radiator
• Aluminum Coolant Expansion Tank
• Heavy Duty Oil Cooler with Braided Lines
• U.S.C.G. Approved Radiator/Coolant Hoses
• Complete Automatic Bilge System (1200 GPH)
• Dual Batteries with Battery Boxes (650 Cranking Amps)
• Ignition Protected 4 Position Battery Selector Switch
• Certified 40 Gallon Aluminum Fuel Tank with Remote Fill
• Cable Steering attached to top of Rudders
• 2’ X 4’ Foot Air Foil Aluminum Rudders, Foam Filled, Nylon Bushings
• Stainless Steel Rudder Rods
• Rudders attached with Stainless Steel Heim Joints
• All Stainless Steel Fasteners
• L.E.D. Lights Attached to Cage
• Floor Board Courtesy Light
• U.S.C.G. Approved Navigational Lights
• B-1 Type Fire Extinguisher with Mount

ENGINE

• New Pleasure Craft Marine Levitator 7.4 Liter/525 Horse Power Engine
• 12-Volt 250 Amp Alternator
• Serpentine Belt Pulley System
• Electric Fuel Pump with Fuel Filter/Water Separator
• U.S.C.G. Approved Fuel Lines
• Electric Gear Reduction Starter
• Heavy-Duty Fly Wheel
• Engine Cowling Cover
• Energy Suspension Interlocking Motor Mounts

REDUCTION

• Stinger Gear Drive
• 2:3 to 1 Ratio
• Soft Drive

PROPELLER

• Sensenich Composite Propeller
• Adjustable Pitch
• 3– Blade 80” JR Series to Match Engine Horse Power

INSTRUMINTATION & LIGHTING

• Aluminum Bootleg Style Panel
• Marine Vinyl Cover
• Marine Standard Wiring
• Lighted Marine Gauges
• Voltmeter
• Temperature Gauge
• Oil Pressure Gauge
• Tachometer
• Hour Meter
• Fuel Gauge
• Labeled & Lighted Marine Toggle Switches with Rubber Boots
• Engine Warning System
• 1 – 12 Volt Marine Power Point
• Fuse Panel with Circuit Breakers

PAINT/POWDERCOAT/WEBBING/Non-Skid

• Seat Shells Painted
• All Walk Areas Non-Skid
• *Rigging (Polished Stainless Steel)

SERVICE PACKAGE

• Oil, Oil Filters, Fuel/Water Separators, High Pressure Fuel Filters

MANUALS

• 2 – Owner/Operational/Maintenance Manuals

TRAINING

• Training for Operation, Maintenance and Safety Provided at Manufacture’s Location

LIMITED-WARRANTY*

• Hull: Manufacture provides a Commercial Use 4 Year Warranty against defects in Workmanship and Materials to the Original Owner. Polymer, Non-Skid and Painted Surfaces are not included in this Warranty *
• Engine: Manufacture warrants its new products to be free from defects in material and workmanship under normal use and service conditions for 3 Year/200 Hour warranty *
• Rigging: Manufacture provides a 2-year Warranty against defects in Workmanship and Materials *
• Reduction Unit: Manufacture warrants its Product to be free from defects in Materials and Workmanship under normal use and service by Original Owner for a Period of 2 Years or 200 operating hours from date of Purchase *
• Propeller: Manufacture warrants its products against defects in Material, Workmanship, and Manufacturing for 3 Year/300 Hours *
• All other Equipment & Accessories Minimum of 1 Year Coverage by repair or replacement *
  *See a GTO Airboat Representative for Details and limitations of Warranties

TRAILER

• Aluminum I-Beam Construction
• Tandem Torsion Axle (3500 lbs. Per Axle)
• 2” Heavy Duty Coupler
• 2 – Safety Chains
• Heavy Duty Tongue Jack with Wheel
• Heavy Duty Wench, Nylon Strap & Safety Chain
• Marine Easy Grease Bearings
• Marine Carpet Covered Running & Side Boards
• 14” Galvanized Wheels
• 14” Galvanized Spare Tire & Wheel with Mount
• D.O.T. LED Lights
• Easy Loading Rear Loaders

SPRAY-TREATMENT SYSTEM

• One 30 to 100 gallon polyethylene tank, aluminum skid mounted aquatic sprayer complete
• One Hypro D-30 diaphragm pump with control valve, gear box.
• One 4.9 HP Honda engine, recoil start
• One suction, return and discharge hoses
• One 12’ lake fill plumbing with venturi and suction filter.
• One 25’ discharge hose with J-D 9 hand gun.

DRAG DISCHARGE SYSTEM

• One dual drag hose complete with hoses, drop pipes and brackets.
• One discharge hose and pressure relief valve assembly